While asphalt proves to be a durable and long-lasting pavement, it still needs to be repaired or replaced every now and then. The depth of a repair is then based on a number of factors.
Determining the Type of Repair That Needs to Be Made
If you discuss a repair with a pavement company in Bremerton, WA, you will find that fixing an asphalt surface will depend on the severity of the surface failure, the depth of the current base, and the underlying material’s compaction.
Determining the Reason for a Repair
So, the reason for distress on an asphalt surface must be determined by a pavement company first before it can be corrected. Basically, the cause of the fault in the asphalt will determine the extent of repair.
Most repairs that pavement company contractors see come in the forms of potholes and alligator cracking. In the case of potholes, the degradation results from heavy traffic use. Also, a pothole will form as the result of poor drainage or when the asphalt surface is too thin. A permanent repair necessitates constructing a patch that completely eliminates the affected spot.
When alligator cracking is seen on an asphalt surface, it is usually caused by a saturated subgrade or base. Correction is made by removing the dampened material or installing drainage. Normally, the drainage is corrected first if water has caused the cracking.
Who to Contact About an Asphalt Repair
Patching procedures for distressed asphalt may include a partial depth repair such as a surface patch or a dig out such as a full-depth repair. Any of these processes are done to lend support to the pavement and to keep the surface safe and smooth. A professional company such as Northern Asphalt LLC can further examine your pavement to see where corrections can be made and how they can lend to the overall integrity and life of an asphalt-paved surface.